WIRED BAND

WHAT YOU’LL NEED:

-aluminum wire

-fabric

-tape measure

-ruler

-pencil/ marker

-scissors

-thread & needle

-pins

STEPS:

-On the wrong side of the fabric, measure 33 inches: length and 3 ½ inches: width

-Fold in half and pin the edges.

-Cut.

-Measure ½ inch.  Mark. (Note: Both tips must be a pointy curve line)

-Stitch following the mark. Make sure to leave a small space (½  inch) at the middle, this will serve as a door for flipping the fabric and entrance of the wire.

-When done in stitching, flip the fabric and insert the measured wire (33 inches).

-DONE!